£499Powermaster-30 With Mobile App
£699Powermaster-30 App & Camera PIR
£699IP CCTV With 2 Dome Camera & NVR
£7992 Ultra HD 4K IP Dome Camera & NVR
Visonic PowerMaster 30 fitted and commissioned by engineers at Smartech Security is an advanced wireless burglar alarm system for detecting and alerting burglary, fire and a variety of other safety hazards. System status information is presented visually and verbally for you to take the right action.The PowerMaster 30 is governed by a control panel designed to collect data from various sensors that are located within and along the perimeter of your home or office. The system identifies wide range of events such as break-in, attempts to tamper with sensors and several types of trouble. Events are automatically reported via PSTN (telephone line) or a GSM (mobile network using SIM card) communication to monitoring stations and/or to your preferred telephones. The person receiving the notification is expected to investigate the event and act accordingly.
Arm or Disarm specific areas of your Home, say Upstairs only
Allows your dogs and cats to freely walk around your home
Receive alerts on your phone when the system is triggered
Sound and strobe lights to alert people.
The alarm will be triggered if the cover, base or power are altered
The alarm system can be armed or disarmed by keyfobs, keypads and proximity tags.In the disarmed state, the system provides you with visual status and initiates an alarm if smoke is detected. In the armed state, the system initiates an alarm upon detection of disturbance in any one of the armed zones. Proximity tags enable authorized people to enter protected areas.Following are a set of procedures for performing basic arming and disarming of the alarm system.
Preparing to Arm : Before arming, make sure that READY is displayed.
Arming ‘AWAY' / ‘HOME' : PRESS button and the system guides you. It gives ample time for you to exit. ARM indicator lights steadily during the armed state.
Disarming and Stopping Alarm : Enter the protected premises via a delayed zone and press . Upon detecting your entrance, the system will start sounding the entry delay beeps alerting you to disarm the system before the entry delay ends.ARM indicator extinguishes once your security alarm is disarmed.
PowerMaster-30 is an advanced wireless home security system with built in PSTN dialer that connects your burglar alarm to the telephone line and a backlighted LCD keypad.It has a high power siren that sounds in case of alarm to deter intruders as well as a inbuilt proximity tag reader.The system respond to events and user action via prerecorded voice messages
Visonic PowerMaster PIR are pet friendly sensors to detect motion in the protected area. They are two-way wireless digital Passive infrared sensors that has increased transmission range and enhanced false alarm immunity.
Magnetic Door Contacts are fully supervised two-way magnetic contact transmitter, designed primarily for protecting your doors and windows to detect a burglary attempt .
This wireless outdoor siren provides perfect security solution for home owners looking for an external siren that is both affordable and reliable.
This is a slim 4-button keyfob that is used to perform most of the common alarm commands like arming and disarming, emergency signaling, panic alarm and viewing the system status
Real phone calls from your security system that tells you if it is a fire, burglar or a panic alarm
Add GSM module to receive text message with alarm information at the time of an event
Push notifications on your App with details of the sensor that triggered the Alarm
Emails with the details of the scence and the status of sensors when the alarm goes off
Visonic Powermaster 30 allows the security system to be connected via a mobile phone SIM card that enables your intruder alarm system to communicate over the GSM networks for system alerts. It can be used as the primary communication or as a back up for the IP (Internet) or PSTN (Telephone) communications in case of communication failure.You can enjoy peace of mind by receiving real time SMS, voice messages and email alerts using the GSM module. It also supports two-way voice communication between you and the security system.
Add the smart phone App integration module to enjoy full control of your home security system directly from any location as you go about your day. You can conveniently arm and disarm your system ??? anytime, from any location using the VisonicGo smartphone app. In the case of an event, receive real-time notification and check the status of the sensors to get the real picture of the security situation.
Buy Visonic PowerMaster 10 Intruder Alarm kit with Mobile App