£499PowerMaster-10 App & Camera PIR
£749Pyronix Enforcer Smart Alarm
£799IP CCTV With 2 Turret Camera & NVR
£9992 Ultra HD 4K IP Dome Camera & NVR
Visonic PowerMaster 10 Smart Alarm fitted by engineers at Smartech Security is a wireless burglar alarm system for detecting and alerting burglary, fire and a variety of other safety hazards. You can control your home security system remotely using the VisonicGo mobile App which is included in the kit. System status information is displayed visually to take correct action.The PowerMaster is governed by a control panel designed to collect data from various sensors that are located within and along the perimeter of your home or office. The system identifies wide range of events such as break-in, attempts to tamper with sensors and several types of trouble. Events are automatically reported via PSTN (telephone line) or a GSM (mobile network using SIM card) communication to monitoring stations and/or to your preferred telephones. The person receiving the notification is expected to investigate the event and act accordingly.
Receive Push Notifications on your Smartphone App
Connected to your landline to get alerts in case of an event
Remotely control your security system via smart phone App
Arm or Disarm specific areas of your Home, say Upstairs only
Allows your dogs and cats to freely walk around your home
Sound and strobe lights to alert people.
The alarm system can be armed or disarmed by keyfobs, keypads and proximity tags and your VisonicGo mobile App.In the disarmed state, the system provides you with visual status and initiates an alarm if smoke is detected. Proximity tags enable authorized people to enter protected areas.Following are a set of procedures for performing basic arming and disarming of the alarm system from keypad.
Preparing to Arm : Before arming, make sure that READY is displayed.
Arming ‘AWAY' / ‘HOME' : PRESS button and the system guides you. It gives ample time for you to exit. ARM indicator lights steadily during the armed state.
Disarming and Stopping Alarm : Enter the protected premises via a delayed zone and press . Upon detecting your entrance, the system will start sounding the entry delay beeps alerting you to disarm the system before the entry delay ends.ARM indicator extinguishes once your security alarm is disarmed.
PowerMaster-10 is a compact wireless home security system with built in PSTN dialer that connects your burglar alarm to the telephone line and a backlighted LCD keypad.It has a high power siren that sounds in case of alarm to deter intruders as well as a inbuilt proximity tag reader.A perfect solution for home owners who require high performance at a low cost.
Visonic Go mobile app enable you to to control your home and business security wherever you may be. You can make the right decisions about events and notifications ??? from anywhere, using their smartphone or tablet.
Visonic PowerMaster PIR are pet friendly sensors to detect motion in the protected area. They are two-way wireless digital Passive infrared sensors that has increased transmission range and enhanced false alarm immunity.
Magnetic Door Contacts are fully supervised two-way magnetic contact transmitter, designed primarily for protecting your doors and windows to detect a burglary attempt .
This wireless outdoor siren provides perfect security solution for home owners looking for an external siren that is both affordable and reliable.
This is a slim 4-button keyfob that is used to perform most of the common alarm commands like arming and disarming, emergency signaling, panic alarm and viewing the system status
Real phone calls from your security system that tells you if it is a fire, burglar or a panic alarm
Add GSM module to receive text message with alarm information at the time of an event
Push notifications on your App with details of the sensor that triggered the Alarm
Emails with the details of the scence and the status of sensors when the alarm goes off
Visonic Powermaster 10 allows the security system to be connected via a mobile phone SIM card that enables your intruder alarm system to communicate over the GSM networks for system alerts. It can be used as the primary communication or as a back up for the IP (Internet) or PSTN (Telephone) communications in case of communication failure.You can enjoy peace of mind by receiving real time SMS and email alerts using the GSM module.
Visonic??s mobile App enables you as well as central monitoring stations to effciently monitor, manage and control Visonic security systems. This app enables residential and small-medium business customers to monitor and control their home or business security system from wherever they are, on-premises or remotely. With this app, you can:Arm and Disarm the alarm system, Control different partitions, View status of various system devices, Enrol, remove and bypass system devices , View system alarms, alerts, and troubles , View history of events & Get push notifications from alarm system
Allows partition specific arming and disarming and view event history of your burglar alarm system
Activate or mute panic alarms and receive alarm push notifications in case of fire or burglary attempt
Check the status of different sensors that are connected to your security system and bypass any if required