£499PowerMaster-10 Wireless Alarm
£499Risco Agility3 Wireless Alarm
£799IP CCTV With 2 Turret Camera & NVR
£9992 Ultra HD 4K IP Dome Camera & NVR
The Pyronix Enforcer 10 GSm alarm controls and monitors a variety of sensors, detectors, and contacts placed throughout the premises, which provide burglary protection. This alarm installed by Engineers at Smartech Security is a Grade 2 Insurance approved 2-way communicating wireless security system that communicates via mobile network and you can receive alarm alert as push notification on your Pyronix App. The burglar alarm control panel comes with a DIGI-GPRS module to install the SIM card of your choice. The security system alerts you or the monitoring stations via SMS in case of an event. SIM card not included in the pack.
Receive Push Notifications on your Smartphone App
Remotely control your security system via smart phone App
Arm or Disarm specific areas of your Home, say Upstairs only
Allows your dogs and cats to freely walk around your home
Receive alerts on your phone when the system is triggered
Receive alerts from alarm via GSM Mobile network
The Pyronix Enforcer alarm system is fully operational from the moment the system is armed. You can arm and disarm the system using the keyfobs thats comes with the kit or remotely using SMS messages. The keyfob has four buttons that can be programmed for specific functions like show status, arm the system, disarm the system, panic alarm etc.The coloured LEDs on the control panel indicates the security system status.
System Armed - Red LED
System Disarmed - Green LED
System Fault - Amber LED
Also, it will allow you to send SMS commands via your mobile phone, allowing you to arm/disarm your burglar alarm remotely.If a text messages commands is not recognised by Enforcer it will send back to the user the wrong command.
123456 Arm A 123456 = User Code. Arm A = Will arm Area A.
123456 Disarm A 123456 = User Code. Disarm A = Will disarm Area A
Pyronix Enforcer control panel supplied and installed by Smartech Security comes with inbuilt DIGI-GPRS module that connects your security system to a SIM card of your choice. Our Installers will set the system for you to receive text messages on your mobile in case of an event.
The Instant Two-way Device Control technology enables instant wake up and instant sleep of the sensors, allowing continuous communication between the control panel and PIR while preserving the battery power. Moreover, there is a reduced risk of false alarms for Pyronix Enforcer as both PIR and Microwave sensors need to be triggered to sound the alarm.
The wireless door or window contact is a transmitter and a receiver ideal for wireless door/window protection that has a built-in magnetic contact and an additional reed switch for anti-sabotage detection.
The Pyronix GPRS/GSM module enables to use a SIM card in the control panel. This allows you to send SMS commands via a mobile phone, allowing you to arm/disarm the panel, check the system status and bypassing sensors remotely. The data subscription in the SIM allows you to use mobile app and receive push notifications as well as remote controlling of your security system
The 4 button remote key fob not only allows you to set and unset your burglar alarm but can also be used as a panic button if set accordingly.
Low power strobe LED technology in the Enforcer siren provides visual indication when the alarm is activated.It comes with low power piezo with high performance 104db audible alarm and tamper protection.
Real phone calls from your security system that tells you if it is a fire, burglar or a panic alarm
Comes with built-in GSM module to receive text message when the alarm goes off
Push notifications on your App with details of the sensor that triggered the Alarm
Emails with the details of the scence and the status of sensors when the alarm goes off
The Pyronix Enforcer GSM Alarm allows the security system to be connected via a mobile phone SIM card that enables your intruder alarm system to communicate over the GSM networks. You can remotely control your system via the Pyronix Home Control+ smartphone App. It uses the mobile data from the SIM card and need to be maintained by the user .
HomeControl is secured to highest standards
Set and Unset your security system
View real time system and sensor status
Receive customised push notifications
Instant access to event history logs